fbpx

 

  • Re: Would like to know the year my Rotax 912 ULS was built

    by » 7 years ago


    4409188 is a ROTAX 912 UL (912 UL2) produced 30-Apr-2008.

    original factory configuration:
    without fuel lines
    UL2 I=2,27 without clutch
    for fixed pitch propeller
    without vacuum pump
    without mech. tachom. pick up
    without air box
    without external generator
    without engine truss
    without air guide baffle
    with std. temperatur sensors
    with nipple conn. for oil pump
    with expansion tank
    starter standard

  • Re: Would like to know the year my Rotax 912 ULS was built

    by » 7 years ago


    Trying to find information on my new to me engine. 912 UL with serial number #4406103.

    I believe it is a 2004? I am hoping it has the newer ignition system than those of the 90's? Been trying to reserch it online before wasting other peoples time. Just new to Rotax 912's and in the learning stages. TBO on this engine I believe is 1500 unless I upgrade the crankcase. Which I have read is very expensive.

    Thanks for anyones help and insight into this engine.

    Wes

  • Re: Would like to know the year my Rotax 912 ULS was built

    by » 7 years ago


    4406103 is a ROTAX 912 UL (912 UL2) produced 22-Dec-2003.

    original factory configuration:
    without fuel lines
    UL2 I=2,27 without clutch
    for fixed pitch propeller
    without vacuum pump
    without mech. tachom. pick up
    without external generator
    without air guide baffle
    with std. temperatur sensors
    with nipple conn. for oil pump
    with expansion tank

    That particular engine will need to comply with SB-912-057UL to obtain a TBO extension to 2000 hours. You should check the logbook to see if it has already been complied with (you can also physically check the crankcase to verify what part number it has...) . Since the engine is "new to you", you should also check the engine logbook to verify that all of the MANDATORY service bulletins were complied with over the years. (See your email for a checklist...)
    starter standard

  • Re: Would like to know the year my Rotax 912 ULS was built

    by » 7 years ago


    Seeking information for serial # 6770586
    Any information greatly appreciated.

  • Re: Would like to know the year my Rotax 912 ULS was built

    by » 7 years ago


    6770586 is a ROTAX 912 UL (912 UL2) produced 1-Dec-2011.

    original factory configuration:
    with fuel lines
    UL2 I=2,27 without clutch
    for fixed pitch propeller
    without vacuum pump
    without mech. tachom. pick up
    without air box
    without external generator
    without engine truss
    without air guide baffle
    with std. temperatur sensors
    with screw connection UNF
    with expansion tank
    starter standard

You do not have permissions to reply to this topic.