Lane B Ignition Coil 3 Fault
over the past two weeks while flying, Lane B light illuminated followed by a “Rotax Land Aircraft” warning on the Dynon. In the Faults page on the Dynon is the error “Lane B Device Status- Ignition Coil 3.”
After this occurred the first time we found several of the spark plug wires connected to ignition coil #3 were in poor condition. We replaced all of the spark plug wires. After replacing them the same warning occurred on the next flight.
Is this due to a bad Ignition coil #3? There are no performance problems and the warning will go away after cycling through lane A and lane B.