Mandatory ALERT Service Bulletin: Inspection and Replacement of Oil Spray Nozzle for ROTAX® Engine Types 912 i, 915 i, and 916 i (Series) SB-912 i-016 / SB-915 i-016 SB-916 i-006

Indeed.  Thanks for your reply!

Any update on the tool availability or the 3D print files?

Don't expect any news on that until mid January.  The factory shuts down mid December to early January for holidays.  

Cheers

(Repost)

In this video, they use a simple plastic tube. Now, I don’t know how they were able to get it onto the sprayer, but this might be a much, much more practical way to get her done…

https://youtu.be/Jy5M166uDSo?si=k5hbOmIoyEZkETTk

Hi Timothy

Read the SB and have a look at the test.  The video is not measuring the flow in my view.  They need to use an air compressor and measure flow rate, the hand pump will not do that.  

From the SB:

If the flow reading is < 4 l/min (1.05 gal/min), the oil spray nozzle is un-serviceable.

Continue to Section 3.5).

 If the flow reading is >= 4 l/min (1.05 gal/min), the oil spray nozzle is serviceable.

Cheers