fbpx

 

  • Re: Question about oil pressure and when it bypasses

    by » 5 years ago


    Bill do you a source for the tape?

  • Re: Question about oil pressure and when it bypasses

    by » 5 years ago


    Bill do you a source for the tape?


    Ace Aviation (Ace Hardware), Lowes, Home Depot, Amazon, Walmart, Ebay or any auto parts store.
    Or you can get it from Parker-Hannifin at ten time the price. :ohmy:
    It comes in many colors. Red or Orange will match the Fire Sleeve nicely.

    Let me GOOGLE that for you.

    Bill Hertzel
    Rotax 912is
    North Ridgeville, OH, USA
    Clicking the "Thank You" is Always Appreciated by Everyone.


    Thank you said by: Wayne Fowler

  • Re: Question about oil pressure and when it bypasses

    by » 5 years ago


    This is the best price I could find.
    https://www.walmart.com/ip/FuseIt-Tape-Self-Fusing-Silicone-Tape-1-x-10-x-30-mil-RED/433062547?wmlspartner=wlpa&selectedSellerId=12895&adid=22222222228100206090&wl0=&wl1=g&wl2=m&wl3=233400182636&wl4=pla-383569789190&wl5=9007135&wl6=&wl7=&wl8=&wl9=pla&wl10=118780834&wl11=online&wl12=433062547&wl13=&veh=sem&gclid=CjwKCAiAiJPkBRAuEiwAEDXZZY410xso_X3S6s3QO-SOrGR6QcTGaxAOwp6YYONcOfxEuK54FESp2hoCb2MQAvD_BwE

    You the man Bill!
    I was just about to drive an hour away for the Parker stuff for around $30.

    I will cover the crimp connection completely, but do I cover the hose clamps completely?
    I usually check the hose clamps for tightness every month or so because they vibrate loose a touch

    Thinking of removing all the hose clamps for this reason.
    can the crimp clamps be opened up so I don't have to remove all the hoses?
    Thinking they will bend open like a hose clamp, but above is the first time I used then.

    Thx

  • Re: Question about oil pressure and when it bypasses

    by » 5 years ago


    I'm a bit skeptical because I had never heard of Fuseit Tape with aircraft so I looked it up. It says nothing about fuel and oil and not enough info in their spec sheet. Engine fires burn up to 1000F - 2000F depending on what's burning.

    http://www.americanfiresleeve.com/firesleeve-high-temperature-heat-flame-pyro-resistant-end-wrap-seal-tape-liquid-silicone-rubber-dip-paste-order-now.html

    End Wrap Tape meets AA59163 / Mil-I-46852)
    It is what has the right temp ratings, fuel and oil.

    High Temperature Silicone Rubber Self-Fusing End Wrap Tape
    meeting A-A-59163, MIL-I-46852, MIL-I-22444 Specifications.
    High Temperature Silicone Rubber End-Wrap Compression Tape is the perfect choice for protecting hydraulic hoses and lines, pneumatic lines, fuel & oil lines, brake lines, wires and cables from exposure to high and extreme heat conditions.

    The special formulation of silicone rubber sheds molten metals, slag, welding splatter, electrical or grinding sparks and contamination. End Wrap Tape also provides protection from ozone, UV and abrasion.

    The Type II tape has a blue stripe running down the center as an aid to performing a standard 50% overlap when wrapping the tape around firesleeve, wire, hoses and cables.Silicone Rubber End Wrap Self Fusing Compression Tape AA59163 MILI46852 MILI22444Pure Silicone Rubber High-Temp End Wrap Tape Silicone End Wrap Tape is self bonding to itself and our silicone rubber coated sleeves and tapes, providing a waterproof/gas tight end to the installation of Sleeve over hoses and cables.
    The special silicone formulation of this tape self-fuses (self-amalgamating) when stretched and over-wrapped. Completely flexible at cold temperatures and can be used to +500ºF / +260ºC continuous exposure. Does not support combustion and resists heat, flame, welding splatter, molten metals, solder drips, slag, sparks, Ozone, UV light and contamination.

    Can be wrapped over oily or wet surfaces and is an excellent emergency repair tape for hoses and pipes. Used extensively in aviation, marine and industrial maintenance, repair and overhaul operations.

    Also available meeting specification A-A-59163 and MIL-I-46852 Type I and Type II.

    Roger Lee
    LSRM-A & Rotax Instructor & Rotax IRC
    Tucson, AZ Ryan Airfield (KRYN)
    520-349-7056 Cell


  • Re: Question about oil pressure and when it bypasses

    by » 5 years ago


    Thx Roger,
    I canceled my order and will get that stuff.

    Thoughts on wrapping hose clamps?
    Thinking I should leave the head if the screw exposed to be able to tighten them.

You do not have permissions to reply to this topic.