Login

Idel RPM

by KHAN in 912 / 914 Technical Questions 5 years ago

Page 2 of 2

Start
Prev
1
2
Next
End

Re: Idel RPM

by KHAN » 5 years ago

KHAN

6 7 11

Dear , would you like to share your experience, because I have 2200 idel RPM and I feel no difficulty while landing, the only abnormality I abdorve is higher noise like grinding with all perameteres normal.

Report
Re: Idel RPM

by Tom Kodey » 5 years ago

Tom Kodey

5 48 15

What are you flying? If 2200 idle RPM works for you there's no problem using it that I know of. As far as I know, there's no maximum. If I set 2200 idle RPM on my RV-12 I'd use a lot of runway before I slowed enough to land.

Thank you said by: KHAN

Report
Re: Idel RPM

by David HEAL » 5 years ago

David HEAL

23 189 422

On the RV-12 (912ULS), Van's suggests a static idle speed of 1,650 rpm. This results in an idle speed of @ 2,100 rpm on power-off short final. Typically I have to add a touch of throttle while rolling out to keep the rpms in the min 1,800-1,900 rpm range. This works well for me.

Thank you said by: KHAN

Report

Page 2 of 2

Start
Prev
1
2
Next
End

You do not have permissions to reply to this topic.

Related Topics

Title	Category	Replies
RPM Signal for CSU Prop	912 / 914 Technical Questions	17
Idle RPM Variation	915iS Technical Questions	1
Oil pressure drops with increasing RPM, but still stays well into the green	912 / 914 Technical Questions	10
G3X RPM display	912 / 914 Technical Questions	7
MAX RPM DROP WITH 100LL	912 / 914 Technical Questions	1

Top

© Rotax-Owner.com

Login